Tell Us About Your Project

The Standard Floor Plan includes interior and exterior walls, windows, doors, openings, skylights, exposed beams, stairs, soffits, built-ins, plumbing fixtures, HVAC registers, accessible measurable spaces. Does not include exposed framing, electrical or lighting. The Basic Floor Plan is minimal in details, but locates all walls, windows, doors, columns, posts and stairs. Basic Floor Plans do not include window type.

The Architectural "Standard" Elevation is a detailed illustration of the vertical plane of the exterior of the building including ornamentation, siding, attached structures, equipment, decorative ornamentation, trim, doors and windows. Also includes finish material annotations, and key dimensions including floor to ceiling heights and header heights. The "Basic" Elevation is a single line representation of major structural elements only, including walls, windows, doors, openings, stairs and roof. No trim, ornamentation, or material annotations.

The Standard Site Plan locates structures, includes a roof plan, key elements and key surfaces. The standard site plan also includes power drop, exposed utilities and property lines that are assumed from the tax assessor's map. The Basic Site Plan locates structures, roof outline, and key surfaces only. No roof plan or neighboring structures. Site plans are not surveys.

A Section is a cut through a span of the structure from the foundation through the roof. Sections include walls, windows, doors, floors, ceilings, and observable major structural elements only.

Interior Elevations illustrates all elements attached to the walls, including heights of walls, window, door, and trim detail including built-in elements, fireplaces, bookcases, etc.

A Roof Plan includes the roof outline with valleys, ridges, hips, slope drainage, parapet walls, and mechanical equipment. Does not include HVAC ducting or plumbing.

A Roof Framing Plan includes plate, ridge, rafters, posts, purlins, etc., with member size & frequency annotations.

The Reflected Ceiling Plan is a plan view drawing of the ceiling. Reflected Ceiling Plans include lighting fixtures, mounding, ornamentation, HVAC ceiling units, soffits, exposed beams, etc.

A Mechanical Plan documents complete HVAC ducting and equipment system. Hidden ducting to be exposed by others. Requires Floor Plan.

The Electrical & Lighting Plan includes receptacles, switches, lighting, control panels, and communication devices. No wire diagram.

A Foundation Plan includes footings, foundation wall framing, columns, piers, posts, girders, sills, joists and slabs. Observable data only.

An Equipment Plan includes boilers, furnaces, pumps, valves control systems, compressors, etc.. Visable components only. Requires Floor Plan. Level of detail may be customized by client.

A BOMA Plan includes a BOMA chart delineating usable and rentable areas with floor plans per ANSI standards. Requires Floor Plan.

Includes width, height, material, type, quantity, style and notes. Requires Floor Plan.

Includes interior walls, trim, casing, base, flooring, ceiling, and moulding finishes. Requires Floor Plan.

Annotate and dimension specific client identified areas and fixtures within Plan views, Elevation Views or Structural Areas. Any necessary domolition to be done by others.

Digital photos of site or structure, deivered via printed and/or digital media. Includes embedded thumbnails in drawings. Minimum of 20 photos.

Locate and justify all visible columns with member size and frequency annotations. Grid to overlay on floor plan drawings unless otherwise specified.